PEM technology
How a PEM electrolyser works
Inside the electrolyser, electricity splits water into hydrogen and oxygen. The polymer membrane conducts protons and keeps the two gases apart.
PEM electrolysis step by step
Our hydrogen generators use PEM (Proton Exchange Membrane) electrolysis, that is, water electrolysis with a proton exchange membrane. The technology delivers high-purity hydrogen and copes well with load changes, which is why it is often paired with renewable sources such as solar and wind.
- 1
Water supply
Demineralised water is fed to the anode side of the cell.
- 2
Splitting at the anode
Direct current splits water into oxygen, protons (H⁺) and electrons. Oxygen leaves the cell.
- 3
Through the membrane
The polymer membrane lets protons through, while electrons flow through the external circuit.
- 4
Hydrogen at the cathode
Protons combine with electrons to form hydrogen, which is then dried and sent to storage or to the point of use.
Advantages of PEM technology
High hydrogen purity
The membrane separates the gases, which helps deliver the high-purity hydrogen required by fuel cells, among other uses.
Compact design
High current density allows units to be smaller than conventional alkaline electrolysers of similar output.
Operation under variable load
A wide power range and a fast response to power changes make it easier to work with renewable sources.
Pressurised hydrogen
PEM electrolysers can produce hydrogen at elevated pressure, which in many systems reduces the need for additional compression.
Renewable hydrogen (RFNBO)
When powered by renewable electricity and meeting the criteria set out in EU rules, hydrogen from electrolysis can qualify as an RFNBO renewable fuel.
No liquid electrolyte
A solid membrane replaces the liquid alkaline electrolyte, which simplifies handling and operation.
PEM, alkaline or SOEC electrolysis?
A general comparison of the three main water electrolysis technologies. Indicative values that vary by manufacturer and design.
| Feature | PEM | Alkaline (AEL) | SOEC |
|---|---|---|---|
| Electrolyte | Solid polymer membrane | Liquid KOH solution | Oxide ceramic |
| Operating temperature | approx. 50–80 °C | approx. 60–90 °C | approx. 700–850 °C |
| Response to power changes | Fast | Usually slower | Limited |
| Typical power supply | Also variable, e.g. renewables | Mostly steady | Steady, with access to heat |
| Maturity | Commercial | Commercial, longest in use | Being commercialised |
Frequently asked questions
What is a PEM electrolyser?
A PEM electrolyser (US spelling: electrolyzer) is a device that uses electricity to split water into hydrogen and oxygen. Its key component is a solid polymer membrane (Proton Exchange Membrane) that conducts protons and keeps the two gases apart.
What is the difference between green and grey hydrogen?
Green hydrogen is made by water electrolysis powered by renewable energy. Grey hydrogen is produced from natural gas, a process that emits CO₂.
How much water is needed to produce 1 kg of hydrogen?
The reaction itself requires about 9 litres of demineralised water per 1 kg of hydrogen. Actual raw water consumption is higher and depends on water quality and treatment.
Can a PEM electrolyser work with solar PV?
Yes. PEM electrolysers cope well with load changes, so they are often paired with solar and wind. How the unit is connected to the renewable installation is decided at the design stage.
What is RFNBO hydrogen?
RFNBO (Renewable Fuels of Non-Biological Origin) is an EU category of renewable fuels. Whether hydrogen qualifies depends on EU rules covering, among other things, the origin of the electricity, and compliance is confirmed under a certification scheme. The criteria are updated from time to time, so it is worth checking them when planning a project.
What hydrogen purity do Tech2Energy electrolysers deliver?
It depends on the model and configuration: from at least 99.8% in the basic LabScale H₂ version to 99.999% in versions with additional purification and in MicroGrid H₂ and TechScale H₂ generators.
Let’s talk about your hydrogen project
Tell us briefly about your project. We will reply with suggested next steps or a time to talk.